AIMS & OBJECTIVES: The aim of this module is to provide the delegates, the necessary knowledge & skills required for the proper use and pre - operational inspection of overhead bridge cranes. Learning Outcomes: To successfully complete this module, delegates are required to meet all the specified learning outcome listed below: • LOLER requirements for bridge cranes • Differences between single girder & double girder cranes • Differences between top running & under running cranes • Operation of bridge crane main components • Bridge crane operating precautions • Responsibilities for ensuring safe lifting operations • Bridge crane inspection requirements • The need for risk assessments & lifting plans • The necessary actions in preparation for lifting • Pre - operation inspection of bridge cranes • Basic hitches used in lifting operations • How sling angles affect sling capacities • Calculating weights of loads • Pre - use inspections of lifting equipment • Correctly prepare load placement area • Operating a bridge crane in a safe and controlled manner to lift, move and lower loads • Shutting down the crane and carrying out post operation inspections. PERFORMANCE EVALUATION: Delegates attending the Overhead Bridge Crane Operator training shall be given a series of explanations and demonstrations. On completion of the module, delegates shall be given a theory questionnaire to assess their understanding of the knowledge elements specified in the learning outcomes. The assessment is an open book and a pass mark of 80% must be attained. Delegates shall also undergo a practical assessment which requires them to demonstrate that they have retained and understood the information covered in the theoretical portion of the module by participating in a practical assessment which includes: conducting pre - use inspections, slinging / rigging up loads, checking set - up, raising, moving and lowering loads.